BP-8176-F
一、Single screw extruder
1、Output:According to the raw material formulation process
2、Screw Diameter:Ø 20
3、Length diameter ratio:1:28
4、Screw speed:0-125rpm frequency control
5、Screw material:It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, roughness Ra≤0.4μm, nitriding depth≥0.6mm,the hardness HRC55~60.
6、Barrel material:It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, roughness Ra≤0.4μm, nitriding depth≥0.6mm,the hardness HRC55~60.
7、Hopper:304 stainless steel material, feeding port is equipped with slide rail quick discharging device.
8、Temperature range:Normal temperature~300℃
9、Heating zone:Heater in 3 areas of charging barrel, heater in 1 area of handpiece. Each area is covered with security wind shield.
10、Cooling zone:3 groups of multi-wing blowing fans force cooling ,quietly and strongly, covered with safety net cover.
11、Melt pressure:Dynisco high precision temperature and pressure sensor to monitor head pressure changes.
12、Melt temperature:Dynisco high precision temperature sensor to monitor melt temperature changes.
13、Electric control system:PID/LED/RKC intelligent digital display temperature controller, high precision digital instrument shows all of the extrusion parameters, including temperature control, driving, pressure, interlocking spreading function.
14、Power:3∮,AC380V,50Hz three-phase and five-line power supply
二、laser diameter measuring instrument
1、Measuring range:0.100-10.000mm
2、Resolution:0.001mm
3、Function:Feedback control, remote display, online communication, and out-of-tolerance alarm.
三、Bath
1、Bath material:304 stainless bath
2、Water level control:Electric water level stainless control valve
3、Water tank size:1200 × 360 × 800 (W × D × H) mm
四、Winding machine
1、Stretch roller:Ø 100 x L130 hot roller
2、Traction speed:0.5-1mm/min frequency control
3、Stretch roller:Ø 100 x L130 hot roller
4、Stretching ratio:0.05
5、Winding plate:φ100×L130mm
6、Winding speed:Tension winding
7、Working stationa:4 unit winding
BP-8176-F
The copyright and trademark of the words, pictures and related "Baopin" logo on this website are all owned by Dongguan Precious Precision Instrument Co. , Ltd. . Any person who infringes upon his lawful rights shall be held legally responsible. Laboratory open mill manufacturer, supplier, manufacturer price, factory quotation, how much
Address:No.29 Houjie Section, Gangkou Avenue, houjie town, Dongguan
Telephone:0769-85752595/85759676/85759987 Faxed:0769-85755756
Mailboxes:bp@dgbaopin.com / msnzhzhao@sina.com
No. 17002540, ICP, Guangdong Technical Support:Haichuan Technology