BP-8176-G
一、Single- Screw Extruder
1、Output:According to the raw material formulation process
2、Screw diameter:Φ20,Φ25Optional
3、Length diameter ratio:1:30 Optional
4、Screw rotation speed:0-95rpm
5、Screw material:It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
6、Barrel material:It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming,polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
7、Heating zone:Mica heater in 3 areas of charging barrel, heater in 2 areas of handpiece.Each areas has a copper cooling fin covered with stainless steel security wind shield.
8、Cooling zone:Three groups of multi-wing blowing fans force cooling ,quietly and strongly.
9、Reduction gearbox:High speed heavy hard teeth surface gear transmission, gear reduction and torque distribution box is integration structure, internal transmission parts adopt imported bearing and oil seal, oil splash lubrication.
10、Drive motor:Precision heavy geared motor, constant torque power output control.
11、Control system:PLC programmable color touch screen, man-machine interface operation system, extrusion process can be displayed and monitored dynamically,Including temperature control, driving, pressure,interlocking spreading function.
12、Power:3∮,AC380V,50Hz Three-phase five-wire
13、Dimension:1250×500×950(W×D×H)mm
14、Weigh:About175Kg
二、Pipe mould
1、Die form:screw shunt type head, both inside and outside layer is adjustable, uniform discharge, convenient adjustment.
2、Pipe diameter:Φ1~16mm(optional)
3、Die-head material:38CrMoAlA chromium molybdenum alloy head, nitriding hardness HRC60.
三、Vacuum cooling water tank(Moveable)
1、Sizing set:wear-resistant copper alloy vacuum type, sizing precision, high stability.
2、Vacuum pump:water-ring vacuum pump
3、Sealing device:Vacuum stage full toughened glass airtight
4、Accommodation mode:Three-dimensional adjustable frame (front and back, left and right sides, top and bottom)
5、Air blower:90w independent fan blow-dry
6、Water level control:Electronic water level controller
7、Water tank material:304 stainless steel bath
8、Dimension:1500×320×850(W×D×H)mm
9、Weight:105Kg
四、Belt tractors (Moveable)
1、Pulling speed:1.5~30m/min adjustable
2、Traction belt:PU wedge wear-resisting belt
3、Belt width:100mm
4、Belt length:600mm(Traction effective length)
5、Accommodation mode:Precision screw adjust the opening and closing height of upper and lower belt.
6、Motor:1KW
五、Cutting machine (Moveable)
1、PLC control, easy operation, suitable for all kinds of material cutting, has manual cutting function.
2、Chipless rotary cutting, incision smooth and efficient.
3、Fully enclosed toughened glass structure, safe and beautiful.
六、Winding pile-up
1、Automatic rotary mode
2、Roller pile-up type
3、Small diameter pipes can be configured double work-place wind machine
BP-8176-G
The copyright and trademark of the words, pictures and related "Baopin" logo on this website are all owned by Dongguan Precious Precision Instrument Co. , Ltd. . Any person who infringes upon his lawful rights shall be held legally responsible. Laboratory open mill manufacturer, supplier, manufacturer price, factory quotation, how much
Address:No.29 Houjie Section, Gangkou Avenue, houjie town, Dongguan
Telephone:0769-85752595/85759676/85759987 Faxed:0769-85755756
Mailboxes:bp@dgbaopin.com / msnzhzhao@sina.com
No. 17002540, ICP, Guangdong Technical Support:Haichuan Technology