BP-8188

LAB TORQUE RHEOMETER

一、Range of application

1、Quality control and raw material testing

2、Product development and formulation optimization

3、Process performance study and process optimization

4、Testing the rheological properties of blends

5、Cross linking (solidification) property testing of thermosetting materials

6、Application of teaching and scientific research

二、Components and function

1、Mainframe：Receiving signal and sending data control temperature and mechanical transmission, real-time mapping pressure -time, temperature-time, torque - time curve reports and so on.

2、Mixing unit：Divided into 60ml and 300ml of two kinds, the former mainly complete material characterization of rheological measurements, the latter complete material mixing and plasticizing, can be used as mixed material research. Equipped with three kinds of rotors with shear capacity. Make the material and rotor execute mixing shear by the same speed but opposite direction force to the chamber wall.

3、Extrusion unit：Simulate actual processing equipment to evaluate material processing performance. Can also cooperate with capillary die under the different shear rate, to measure real viscosity of melted plastic and the objective characterization of material fluidity.

4、Other parts：Traction, calendering, blown film, automatic measuring and weighing are optional, in order to complete the material modification, the measurement of impurities, such as tensile rheological study.

三、Main parameters index

1、Mainframe

(1)Motor power：4.0KW

(2)Rotation speed range：0.1～150rpm

(3)Rotation speed deviation：±0.5%F.S.

(4)Torque range：0～200Nm

(5)Torque deviation：±0.1%F.S.

(6)Torque measurement：cantilever dynamic torque measurement.

(7)Melt pressure range：0.1～100Mpa

(8)Pressure deviation：±0.5%F.S.

(9)Temp.range：room temperature～300℃

(10)Temp. deviation：±5.0℃

(11)Electric control system：including rotation speed,temperature,pressure,torque etc.

(12)Testing software：Mixing unit data processing software,Extrusion unit data processing software,Polymer melt measurement data processing software.

(13)Dimension：755×470×1170(W×D×H)mm

(14)Power：3∮，AC380V,50Hz

Mixing unit

(1)Chamber capacity：60ml

(2)Rotor material：38CrMoAlA

(3)Rotor speed ratio：3:2

(4)Max torque：200Nm

(5)Rotor type：Roller 

(6)Max roation speed：250rpm

(7)Max temp.：300℃

(8)Temp. control system：RKC, J-type thermocouple; 3-zone electric heating, fan cooling.

(9)Pressing method：manual pressing

2、Extrusion unit

(1)Screw diameter：Φ20mm

(2)Compression ratio：2.5:1

(3)Length diameter ratio：25:1

(4)Screw material：38CrMoAlA

(5)Temp. control system：Electric heating, blower fan cooling.

■ Die configuration

(1)Circle shape：Φ2.0mm, Φ3.0mm, Φ4.0mm (Optional) 

(2)Sheet shape：100×（0～1.5mm）W×D,thickness can be adjustable(Optional)

BP-8188