I. Twin Screw Extruder
1. Temperature range: Normal temperature ~300℃
2. Screw diameter: Φ20 mm
3. Length diameter ratio: 1:40 optional
4. Screw direction: Rodent type, parallel and same direction
5. Screw rotation speed:0-280rpm
6. Screw material: The mandrel is made of 40CrNiMoA chromium-molybdenum alloy tool steel,
and the threaded components are made of W6Mo5CR4V2 wear-resistant alloy steel, with a
hardness of HRC60, with conveying blocks, mixing blocks, shearing blocks, banburying blocks,
kneading blocks, countercurrent blocks, building block series components, and the mandrel is
gradually splined and can be combined according to any material ratio to meet the needs of
different extrusion processes
7. Barrel material: The 5-section barrel is made of 45# nitriding steel forgings, lined with a301
wear-resistant alloy sleeve, with hardness of HRC60, and treated by nitriding, quenching and
tempering and ultra precision grinding, with surface roughness Ra ≤ 0.4 μm. Wear and corrosion
resistance
8. Combination method: The combination mode of the screw suite is building block spiral with
self-cleaning function. The machine barrel is a multi-section combination type, with a clamshell
open structure for easy cleaning and observation
9. Heating zone: 5 cast aluminum heaters fixed at barrel, 1 heater at handpiece, each section with
1 kw heating power, external covered with safety protective wind hood
10.Cooling zone: The entire section of the barrel adopts a soft water circulation cooling system, each
segments of cooling water flow rate is adjustable, equipped with self-priming circulating water pump,
304 stainless steel water storage tank, inlet and outlet water pipes and the electromagnetic valve
components,etc. Can implement independent temperature control and cooling for each section of the
barrel unit
11.Vacuum zone: Water circulation vacuum degassing device, equipped with water ring vacuum pumps,
vacuum gauge, regulating valve and other components, forming a non-clogging dehumidification
exhaust system
12.Feeding device: Adopting double screw metering type forced feeding, equipped with a horizontal mixer,
the feeding is uniform and stable, and it is not easy to bridge. The feeding speed is adjustable by
frequency conversion from 0-50rpm, and a sliding rail type fast discharge device is installed
13.Reduction gearbox: High speed heavy duty hard tooth surface gear transmission, with an integrated
structure of gear reduction and torque distribution box, internal transmission parts adopt imported
high load bearing and oil seal, oil-immersed splash lubrication, smooth operation
14.Safeguard: Safeguard functions include: Melt pressure is interlocked with the host for overpressure
alarm protection; Melt temperature is interlocked with the host for startup and shutdown protection;
Feeding and host interlocking for startup sequence protection.
15.Electric control system: PLC programmable color touch screen, man-machine interface operation system,
extrusion process can be displayed and monitored dynamically, including temperature control, driving,
speed, pressure, interlocking and intercontrol function
16.Power: 3∮, AC380V, 50Hz Three-phase five-wire
17.Dimension: 1950×500×1500（W×D×H）mm
18.Weight: About 285Kg
II. Water Tank
1. Water tank material: 304 stainless steel bath
2. Hanging line rack: 4 groups of guide roller combinations, can adjust water depth and distance
3. Fan: 0.15 kw mute blow dry fan
4. Water level control: Stainless steel water level control valve
5. Dimension: 1200×260×800（W×D×H）mm
6. Weight: 28Kg
III. Pelletizer
1. Strand quantity: 3 strands
2. Cutting length: 1～3mm cutting tools clearance is adjustable
3. Traction speed: 1～25m/min frequency adjustable
4. Cutting speed: 1～20Kg/h adjustable
5. Cutter material: High speed alloy steel
6. Motor: 1.5Kw precision speed regulating motor
7. Power: 3∮, AC380V, 10A
8. Dimension: 450×430×850（W×D×H）mm
9. Weight: 125Kg
No evaluation information！