新闻资讯

新闻资讯

current position: Home > News Center > 公司新闻

News CenterNews

怎么让塑胶密炼机达到好的效果!

2024-04-29 14:18:43
times

如何让塑胶密炼机达到良好的塑炼效果:


1、时间

密炼机塑炼与开炼机塑炼不同,生胶的可塑度随在密炼机中塑炼时间的增长而不断增大。因此,制定炼胶条件主要就是根据可塑度的要求确定适当的塑炼时间。


2、装胶量和上顶栓压力

装胶量过小,塑炼效果低。装胶量过大,使生胶塑炼不均匀,而且会使排胶温度过高,另外还能使设备超负荷运转而易于损坏。在密炼机塑炼过程中,上顶栓必须对胶料加压,以保证获得良好的塑炼效果,在一定范围内,塑炼效果随上顶栓压力的增大而增大。


3、转子转速

子速度越快,生热越大,氧化裂解也越快,塑炼效果好,塑炼时间缩短。


4、温度

温度升高,热氧化裂解快,塑炼效果好。但是温度过高会导致橡胶分子过度裂解,导致物理机械性能下降。天然橡胶排胶温度一般控制在140℃-160℃,丁苯橡胶控制在140℃,因为温度过高会发生交联或支化等反应,反而降低可塑度。一般不用密炼机塑炼,在密炼温度下,非但不能获得塑炼效果,反而会导致生成凝胶。

Recently Viewed:

Related products

Related news

  • menu
  • 1

Copyright Statement: The text, images, and related "BAOPIN" logo on this website are owned by Dongguan Baopin Precision Instrument Co., Ltd, Without the permission of the rights holder, no unit or individual is allowed to reprint or steal. Those who infringe on their legitimate rights will be held legally responsible.

    Address: No. 29, Houjie Section, Gangkou Avenue, Houjie Town, Dongguan City, Guangdong Province     

          Telephone: 0769-85752595/0769-85759676/0769-85759987   Technical Support: Haichuan Technology

E-Mail: bp@dgbaopin.com/msnzhzhao@sina.com        Record No.: Guangdong ICP No. 17002540