I. Application scope
1. Research and development of new product formulas
2. Optimization of production process parameters
3. Small scale production of narrow film
4. Casting performance testing of polymer materials
II. Single Screw Extruder
1. Capacity: about 3-6kg/h, specific according to the raw material process formula
2. Temperature range: ～300℃
3. Screw diameter:Φ20mm, mixed and dispersed type
4. Length diameter ratio:1:28 other length diameter ratios optional
5. Screw rotation speed:0-95rpm frequency control
6. Electronic control system: PLC programmable color touch screen, man-machine interface operation
system, extrusion process can be displayed and monitored dynamically, including temperature control,
speed, pressure, driving, interlock and intercontrol function.
7. Safety protection: The melt pressure is interlocked with the host for overpressure alarm protection; Melt
temperature is interlocked with the host for low-temperature startup protection
8. Power:3∮, AC380V, 50Hz Three-phase five-wire
9. Dimension:1425×500×1360（W×D×H）mm
10.Weight: About 175 kg
III. Cast film die
1. Die head form: Hanger type
2. Die head material: CrNiMoA alloy steel
3. Die head hardness: HRC65
4. Mold lip width :260mm
5. Film thickness: 0.05~ 0.25mm adjustable
6. Heater: stainless steel heating rod, equipped with aviation sockets
7. Feeding method: Feeding at the center round mouth of the die
8. Installation method: Vertical installation with rollers
IV. Casting unit
1. Connection method: Built-in independent valve and rotary joint
2. Roller material: 38CrMoAl chrome molybdenum alloy material
3. Roller surface: HRC60 mirror chrome plating
4. Combination method: Vertical installation with the mold head
V. Winding unit
1. Conveying rollers: Multi row aluminum hard oxygen roller combination
2. Traction rollers: Pneumatic clamping combination of rubber roller and mirror roller
3. Tension type: Automatic control by tension controller
4. Edge cutting device: Install pneumatic slide rail tool holder for edge material cutting
5. Electronic control system: High performance PLC programmable 15-inch color LCD touch screen, multi
screen display of man-machine interface, control all process parameters, such as temperature, speed,
drive, traction, winding, pneumatic etc, interlock and intercontrol function.
6. Power supply: 3∮, AC380V, 50Hz
7. Volume: 1980×1080×1670（W×D×H）mm
8. Weight: About 485Kg
No evaluation information！