I. Application scope
1. Research and development of new product formulas
2. Optimization of production process parameters
3. Small scale production of narrow film
4. Casting performance testing of polymer materials
II. Single Screw Extruder-3 Sets
1. Temperature range: ～300℃
2. Screw diameter:Φ20mm, mixed and dispersed type
3. Length diameter ratio:1:28 other length diameter ratios optional
4. Screw rotation speed:0-95rpm frequency control
5. Power:3∮, AC380V, 50Hz Three-phase five-wire
6. Dimension:1900×1100×1350（W×D×H）mm
7. Weight: About 355 kg
III. Distributor
1. Number of layers: A/B/C three layers
2. Axial distributor: special configuration
3. Radial distributor: special configuration
IV. Co extrusion casting die head
1. Die head form: In mold hanger type composite flow channel
2. Die head material: CrNiMoA alloy steel
3. Die head hardness: HRC65
4. Mold lip width :260mm
5. Film thickness: 0.08~ 0.25mm adjustable
6. Heater: stainless steel heating rod, equipped with aviation sockets
7. Feeding method: Feeding at the center round mouth of the die
V. Casting unit
1. Roller material: 38CrMoAl chrome molybdenum alloy material, HRC60 mirror chrome plating
2. Roller speed: 0~15 rpm servo speed regulation
3. Combination method: Vertical installation of mold head
VI. Winding unit
1. Conveying rollers: Multi row aluminum hard oxygen roller combination
2. Traction rollers: Pneumatic clamping combination of rubber roller and mirror roller
3. Traction speed: 0 ~ 10 m/min servo speed regulation
4. Tension type: Automatic control by tension controller
5. Edge cutting device: Install pneumatic slide rail tool holder for edge material cutting
VII.Electronic control unit
1. Electronic control system: High performance PLC programmable 15-inch color LCD touch screen,
multi screen display of man-machine interface, control all process parameters, such as temperature,
speed, drive, traction, winding, pneumatic etc, interlock and intercontrol function.
2. Safety protection: The melt pressure is interlocked with the host for overpressure alarm protection;
the melt temperature is interlocked with the host for low temperature start-up protection
VIII.Others
1. Power supply: 3∮, AC380V, 50Hz
2. Volume: 1700×1100×1670（W×D×H）mm
3. Weight: About 485Kg
No evaluation information！