I. Typical application
1) Production of micro precision parts
2) Small batch production
3) Laboratory testing and sampling
4) Teaching and training
II. Specification parameters
1. Temperature range: Room temp. ~ 300℃
2. Temperature accuracy: ±1 ℃
3. Screw diameter: 22mm
4. Screw length diameter: 15:1
5. Screw rotation: 0-165rpm
6. Screw material: 38CrMoAl chromium-molybdenum alloy, the surface is treated by quenching and
tempering, nitriding, chrome plating, polishing and ultra-fine grinding, roughness Ra≤0.4μm,
depth of nitride layer ≥0.6mm, hardness HRC55～60
7. Barrel material: 45# carbon structural steel, the surface is treated by quenching and tempering,
nitriding, chrome plating, polishing and ultra-fine grinding, the roughness Ra≤0.4μm, the depth
of the nitride layer reaches ≥0.6mm, and the hardness is HRC55～60
8. Heating zone: Heater in 3 areas of charging barrel, heater in 1 area of handpiece. Each area is covered
with security wind shield
9. Hopper: 304 stainless steel material material, equipped with a sliding rail type quick discharge device
10.Heating power: 2.0KW
11.Electric control system: PLC programmable color touch screen, human-machine interface operation,
injection process can be dynamically displayed, with temperature, time, pressure, flow rate, back
pressure, and speed preset functions
12.Working mode: It has three working modes: manual, semi-automatic, and fully automatic. Manual
mode: Manually operate various function buttons. Semi automatic mode: mold closing - injection
- pre plastic - mold opening – ejection. Fully automatic mode: mold closing - injection - pre plastic
- mold opening - ejection - timed mold closing.
13.Theory of injection capacity: 22 cm³
14.Injection weight: 18g
15.Plasticizing capacity: 2.6g/s
16.Injection rate: 24g/s
17.Injection pressure: 14Mpa
18.Clamping force: 250KN
19.Move mould stroke: 150mm
20.Rod spacing: 240×190mm(W×H)
21.Maximum mold thickness: 220mm
22.Minimum mold thickness: 80mm
23.Ejection stroke: 40mm
24.Ejection force: 13KN
25.Ejection points: 1PC
26.Mold positioning hole diameter: 55mm
27.The maximum oil pump pressure: 14Mpa
28.Oil pump motor power: 3KW
29.Hydraulic medium: Mobil 46# anti-wear hydraulic oil (customer-owned)
30.Oil cylinder volume: 85L
31.Power: 3∮，AC380V，25A
32.Dimension: 1500×660×1250（W×D×H）mm
33.Weight: About 650Kg
III. Mold
1. Material: S136 alloy material
2. Accuracy: precision type
3. Product shape: tensile, impact, bending and other standard specimens.
4. Size requirements: according to the requirements of user or standard sample section dimensions.
No evaluation information！